ABB ACS560 - Installing the Drive Vertically, Frames R3

4. Position the drive onto the screws on the wall. Tighten the screws in the wall
securely.
3
￭
Installing the drive vertically, frames R3...R4
1. Mark the hole locations with the mounting template included in the package.
Do not leave the mounting template behind the drive. The drive dimensions
and hole locations are also shown in the drawings, see chapter Dimension
drawings (page 171).
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
Mechanical installation 49
 Installing the drive vertically, frame size R3...R4
1. Mark the hole locations with the mounting template included in the package. Do
not leave the mounting template behind the drive. The drive dimensions and hole
locations are also shown in the drawings, see chapter Dimension drawings on
page 149.
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
2
3
R3 R4
mm in mm in
a 160 6.30 160 6.30
b 473 18.62 619 24.37
Weight kg lb kg lb
14.86 32.77 23.0 50.72
1
×4
1
62 Mechanical installation
4