ABB ACS560 - Installing the Drive; Installing the Drive Vertically, Frames R0

Installing the drive
￭
Installing the drive vertically, frames R0…R2
The figures show frame R0 as an example.
1. Mark the hole locations with the mounting template included in the package.
Do not leave the mounting template behind the drive. The drive dimensions
and hole locations are also shown in the drawings, see chapter Dimension
drawings (page 171).
Note: You can also adopt guide rail installation.
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the screws or bolts into the
anchors or plugs.
×4
3
R0…R2: M5
×4
2
×4
1
R2R1R0
inmminmminmm
5.831482.95751.9750a
7.521917.521917.52191b
lbkglbkglbkgWeight
6.42.94.21.93.51.6
Mechanical installation 61