ABB ACS560 - Page 311

Parameters 311
41.48 Set 2 wake-up
delay
See parameter 40.48 Set 1 wake-up delay. 0.50 s
41.49 Set 2 tracking mode See parameter 40.49 Set 1 tracking mode. Not selected
41.50 Set 2 tracking ref
selection
See parameter 40.50 Set 1 tracking ref selection. Not selected
41.51 Set 2 trim mode See parameter 40.51 Set 1 trim mode. Off
41.52 Set 2 trim selection See parameter 40.52 Set 1 trim selection. Speed
41.53 Set 2 trimmed ref
pointer
See parameter 40.53 Set 1 trimmed ref pointer. Not selected
41.54 Set 2 trim mix See parameter 40.54 Set 1 trim mix. 0.000
41.55 Set 2 trim adjust See parameter 40.55 Set 1 trim adjust. 1.000
41.56 Set 2 trim source See parameter 40.56 Set 1 trim source. PID output
41.58 Set 2 increase
prevention
See parameter 40.58 Set 1 increase prevention. No
41.59 Set 2 decrease
prevention
See parameter 40.59 Set 1 decrease prevention. No
41.60 Set 2 PID activation
source
See parameter 40.60 Set 1 PID activation source. On
41.79 Set 2 units See parameter 40.79 Set 1 units. °C
41.80 Set 1 PID output
min source
Selects the source for set 2 PID output minimum. Set2 output
min
None None. 0
Set2 output min 41.36
Set 2 output min.1
Other Source selection (see Terms and abbreviations on page 162). -
41.81 Set 1 PID output
max source
Selects the source for set 2 PID output maximum. Set2 output
max
None None. 0
Set2 output max 41.37 Set 2 output max.1
Other Source selection (see Terms and abbreviations on page 162). -
41.89 Set 2 setpoint
multiplier
See parameter 40.89 Set 1 feedback multiplier 1.00
41.90 Set 2 feedback
multiplier
Defines the multiplier used in formulas of parameter 41.10
Set 2 feedback function.
1.00
-100000.00…
100000.00
Multiplier. 1 = 1
No. Name/Value Description Def/FbEq16