ABB ACS580 - Page 185

Parameters 181
Magnetized Bit 1 of 06.17 Drive status word 2 (see page 155). 6
Running Bit 6 of 06.16 Drive status word 1 (see page 155). 7
Ready ref Bit 2 of 06.11 Main status word (see page 154). 8
At setpoint Bit 8 of 06.11 Main status word (see page 154). 9
Reverse Bit 2 of 06.19 Speed control status word (see page 156). 10
Zero speed Bit 0 of 06.19 Speed control status word (see page 156). 11
Above limit Bit 10 of 06.17 Drive status word 2 (see page 155). 12
Warning Bit 7 of 06.11 Main status word (see page 154). 13
Fault Bit 3 of 06.11 Main status word (see page 154). 14
Fault (-1) Inverted bit 3 of 06.11 Main status word (see page 154). 15
Fault/Warning Bit 3 of 06.11 Main status word OR bit 7 of 06.11 Main status
word (see page 154).
16
Overcurrent Fault 2310 Overcurrent has occurred. 17
Overvoltage Fault 3210 DC link overvoltage has occurred. 18
Drive temp Fault 2381 IGBT overload or 4110 Control board temperature
or 4210 IGBT overtemperature or 4290 Cooling or 42F1 IGBT
temperature or 4310 Excess temperature or 4380 Excess
temperature difference has occurred.
19
Undervoltage Fault 3220 DC link undervoltage has occurred. 20
Motor temp Fault 4981 External temperature 1 or 4982 External
temperature 2 has occurred.
21
Brake command Bit 0 of 44.01 Brake control status (see page 292). 22
Ext2 active Bit 11 of 06.16 Drive status word 1 (see page 155). 23
Remote control Bit 9 of 06.11 Main status word (see page 154). 24
Reserved 25…26
Timed function 1 Bit 0 of 34.01 Timed functions status (see page 255). 27
Timed function 2 Bit 1 of 34.01 Timed functions status (see page 255). 28
Timed function 3 Bit 2 of 34.01 Timed functions status (see page 255). 29
Reserved 30…32
Supervision 1 Bit 0 of 32.01 Supervision status (see page 248). 33
Supervision 2 Bit 1 of 32.01 Supervision status (see page 248). 34
Supervision 3 Bit 2 of 32.01 Supervision status (see page 248). 35
Reserved 36…38
Start delay Bit 13 of 06.17 Drive status word 2 (see page 155). 39
RO/DIO control
word bit0
Bit 0 of 10.99 RO/DIO control word (see page 164). 40
RO/DIO control
word bit1
Bit 1 of 10.99 RO/DIO control word (see page 164). 41
RO/DIO control
word bit2
Bit 2 of 10.99 RO/DIO control word (see page 164). 42
PFC1 Bit 0 of 76.01 PFC status (see page 318). 45
PFC2 Bit 1 of 76.01 PFC status (see page 318). 46
PFC3 Bit 2 of 76.01 PFC status (see page 318). 47
PFC4 Bit 3 of 76.01 PFC status (see page 318). 48
No. Name/Value Description Def/FbEq16
ACS580 FW.book Page 181 Wednesday, September 21, 2016 9:48 PM