Additional parameter data 373
71.33 Integration time Real 0.0…9999.0 s 10 = 1 s
71.34 Derivation time Real 0.000…10.000 s 1000 = 1 s
71.35 Derivation filter time Real 0.0…10.0 s 10 = 1 s
71.36 Output min Real -32768.0…32767.0 - 10 = 1
71.37 Output max Real -32768.0…32767.0 - 10 = 1
71.38 Output freeze enable Binary
src
--1 = 1
71.39 Deadband range Real 0.0…32767.0 - 10 = 1
71.40 Deadband delay Real 0.0…3600.0 s 10 = 1 s
71.58 Increase prevention Binary
src
--1 = 1
71.59 Decrease prevention Binary
src
--1 = 1
71.62 Internal setpoint actual Real -32768.00…32767.00 PID
customer
units
100 = 1 PID
customer unit
76 PFC configuration
76.01 PFC status PB 0000h…FFFFh - 1 = 1
76.02 PFC system status PB 0000h…FFFFh - 1 = 1
76.11 Pump/fan status 1 PB 0000h…FFFFh - 1 = 1
76.12 Pump/fan status 2 PB 0000h…FFFFh - 1 = 1
76.13 Pump/fan status 3 PB 0000h…FFFFh - 1 = 1
76.14 Pump/fan status 4 PB 0000h…FFFFh - 1 = 1
76.21 PFC configuration List 0, 2…3 - 1 = 1
76.25 Number of motors Real 1…4 - 1 = 1
76.26 Min number of motors allowed Real 0…4 - 1 = 1
76.27 Max number of motors allowed Real 1…4 - 1 = 1
76.30 Start speed 1 Real 0…32767 rpm/Hz 1 = 1 unit
76.31 Start speed 2 Real 0…32767 rpm/Hz 1 = 1 unit
76.32 Start speed 3 Real 0…32767 rpm/Hz 1 = 1 unit
76.41 Stop speed 1 Real 0…32767 rpm/Hz 1 = 1 unit
76.42 Stop speed 2 Real 0…32767 rpm/Hz 1 = 1 unit
76.43 Stop speed 3 Real 0…32767 rpm/Hz 1 = 1 unit
76.55 Start delay Real 0.00…12600.00 s 100 = 1 s
76.56 Stop delay Real 0.00…12600.00 s 100 = 1 s
76.57 Speed hold on Real 0.00…1000.00 s 100 = 1 s
76.58 Speed hold off Real 0.00…1000.00 s 100 = 1 s
76.59 PFC contactor delay Real 0.20…600.00 s 100 = 1 s
76.60 PFC ramp acceleration time Real 0.00…1800.00 s 100 = 1 s
76.61 PFC ramp deceleration time Real 0.00…1800.00 s 100 = 1 s
76.70 Autochange List 0…13 - 1 = 1
76.71 Autochange interval Real 0.00…42949672.95 h 100 = 1 h
76.72 Maximum wear imbalance Real 0.00…1000000.00 h 100 = 1 h
No. Name Type Range Unit FbEq32
ACS580 FW.book Page 373 Wednesday, September 21, 2016 9:48 PM