Disposal
The main parts of the drive can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals
can be recycled as material. Plastics, rubber, cardboard and other packaging material
can be used in energy recovery.
Printed circuit boards and DC capacitors need selective treatment according to IEC
62635 guidelines.
To aid recycling, most plastic parts are marked with an appropriate identification
code. In addition, components containing substances of very high concern (SVHCs)
are listed in European Chemicals Agency's SCIP database. SCIP is the database for
information on Substances of Concern In articles as such or in complex objects
(Products) established under the Waste Framework Directive (2008/98/EC). For further
information, contact your local ABB distributor or consult European Chemicals Agency's
SCIP database to find out which SVHCs are used in the drive, and to find out where
those components are located.
Contact your local ABB distributor for further information on environmental aspects.
End of life treatment must follow international and national regulations.
For more information on ABB end of life services, refer to
new.abb.com/service/end-of-lifeservices.
Applicable standards
InformationStandard
European electrical safety
Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements – Electrical, thermal and energy
EN 61800-5-1:2007 + A1:2017 +
A11:2021
IEC 61800-5-1:2007 + Amd1:2016
EMC performance
Adjustable speed electrical power drive systems - Part 3: EMC re-
quirements and specific test methods
EN 61800-3:2004 + A1:2012
*IEC 61800-3 ed. 2.1 (2007 +
Amd1:2011)
*For compliance with IEC 61800-3 ed. 3.0 (2017), please contact
ABB.
Electrical and electronic installations in ships - Electromagnetic
compatibility (EMC) - Ships with a metallic hull
IEC 60533:2015
Electrical and electronic installations in ships - Electromagnetic
compatibility (EMC) - Ships with a non-metallic hull
1)
IEC 62742:2021
Product requirements in North America
Industrial Control Panels
2)
UL 508A: 2nd edition
Industrial Control Panels and Assemblies
2)
CSA C22.2 No. 286-17, 2nd edition
242 Technical data
To Next Page
Loading...
