TÜV Safety Approved mark (functional safety)
Product contains Safe torque off and possibly other (optional) safety functions which are
certified by TÜV according to the relevant functional safety standards. Applicable to drives
and inverters; not applicable to supply, brake or DC/DC converter units or modules.
Electronic Information Products (EIP) symbol including an Environment Friendly Use Period
(EFUP).
Product is compliant with the People’s Republic of China Electronic Industry Standard (SJ/T
11364-2014) about hazardous substances. The EFUP is 20 years. China RoHS II Declaration of
Conformity is available from https://library.abb.com.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection
point and not placed in the normal waste stream.
EMC compliance (IEC/EN 61800-3)
￭
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment.
Likewise, the equipment must not disturb or interfere with any other product or system
within its locality.
First environment includes establishments connected to a low-voltage network which
supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Drive of category C1: drive of rated voltage less than 1000 V and intended for use in
the first environment.
Drive of category C2: drive of rated voltage less than 1000 V and intended to be installed
and started up only by a professional when used in the first environment.
Note: A professional is a person or organization having necessary skills in installing
and/or starting up power drive systems, including their EMC aspects.
Drive of category C3: drive of rated voltage less than 1000 V and intended for use in
the second environment and not intended for use in the first environment.
Drive of category C4: drive of rated voltage equal to or above 1000 V, or rated current
equal to or above 400 A, or intended for use in complex systems in the second
environment.
￭
Category C2
The drive complies with the standard with the following provisions:
1. The drive is equipped with a diode supply unit or an IGBT supply unit.
2. The drive is equipped with the the EMC filter for category C2 (option +E202).
3. The input power, motor cables, and control cables are selected as specified in the
drive hardware manual.
244 Technical data
To Next Page
Loading...
