Door devices
DescriptionLabel in local
language
Label in Eng-
lish
Ready light (option +G327)-READY1
Run light (option +G328)-RUN2
Fault light (option +G329)-FAULT3
Run enable signal switch for the supply unit-ENABLE / RUN4
0-1
Run enable signal off (starting the supply unit not allowed)0
Run enable signal on (starting the supply unit allowed).
Close the main disconnecting device (if present).
1
Emergency stop reset push button (with emergency stop options
only)
-E-STOP RESET5
Ground (earth) fault light and reset push button (option +Q954)-EARTH FAULT6
Reserved for order-based engineered equipment--7
Emergency stop push button (with emergency stop options only)-EMERGENCY
STOP
8
The layout depends on the options selected.
48 Operation principle and hardware description
To Next Page
Loading...
