￭
Control panel
The ACS-AP-W is the user interface of the drive. It provides the essential controls such
as Start/Stop/Direction/Reset/Reference, and the parameter settings for the inverter
control program.
The control panel can be removed by pulling it forward by the top edge and reinstalled
in reverse order. For the use of the control panel, see ACS-AP-I, -S, -W and ACH-AP-H,
-W Assistant control panels user’s manual (3AUA0000085685 [English]) and the
firmware manual.
Control by PC tools
There is a USB connector on the front of the panel that can be used to connect a PC
to the drive. When a PC is connected to the control panel, the control panel keypad is
disabled.
50 Operation principle and hardware description
To Next Page
Loading...
