Type designation key
The type designation contains information on the specifications and configuration
of the drive. The first digits from left express the basic drive type. The optional
selections are given thereafter, separated by plus signs, eg, +E202. Codes preceded
by a zero (eg. +0J400) indicate the absence of the specified feature. The main selections
are described below. Not all selections are available for all types. For more information,
refer to the ordering instructions available separately on request.
DescriptionCode
Basic code
Product seriesACS880
Default configuration: air-cooled cabinet-installed drive, IP22 (UL type 1), main switch-discon-
nector (and contactor) or breaker, aR fuses, AC input choke, ACS-AP-W assistant control
panel (with Bluetooth), EMC filter (category 3, 2nd Environment), du/dt filters, common mode
filtering, standard wire markings, ACS880 primary control program, Safe torque off function,
coated circuit boards, bottom entry and exit of cables with lead-through-type entries, multi-
lingual door device label sticker, USB memory stick containing circuit diagrams, dimension
drawings and manuals.
ACS880-
07
Size
Refer to the rating tablesxxxxx
Voltage range
380…415 V AC. This is indicated in the type designation label as typical input voltage level
(3~ 400 V AC)
3
380…500 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 400/480/500 V AC)
5
525…690 V AC. This is indicated in the type designation label as typical input voltage levels
(3~ 525/600/690 V AC)
7
￭
Option codes
DescriptionCode
12-pulse supply connectionA004
IP42 (UL Type 1 Filtered)B054
IP54 (UL Type 12)B055
Marine construction. See section Marine construction (option +C121) (page 51).C121
Air inlet through bottom of cabinet. See section Air inlet through the bottom of the cabinet
(option +C128) (page 82).
C128
UL Listed (evaluated to both U.S. and Canadian safety requirements). See section UL Listed
(option +C129) (page 52).
C129
Channeled air outlet. See section Channeled air outlet (option +C130) (page 52).C130
Marine type approval. Refer to ACS880…+C132 marine type-approved cabinet-built drives
supplement (3AXD50000039629 [English]).
C132
CSA approved. See section CSA Approved (option +C134) (page 52).C134
Plinth height 100 mm. See section Plinth height (options +C164 and +C179) (page 52).C164
Plinth height 200 mm. See section Plinth height (options +C164 and +C179) (page 52).C179
Seismic design. See section Seismic design (option +C180) (page 52).C180
Empty 400 mm wide cubicle on left. See section Empty cubicles on left (options
+C199…C201) (page 53).
C199
Operation principle and hardware description 61
To Next Page
Loading...
