Alternative 2 – Using the holes inside the cabinet
1. Attach the cabinet to the floor through the bottom fastening holes with size
M10…M12 (3/8”…1/2”) bolts. The recommended maximum distance between the
front edge fastening points is 800 mm (31.5”).
2. If the back fastening holes are not accessible, attach the top of the cabinet to the
wall with L-brackets (not included in the delivery) bolted to the lifting eye/bar
holes.
Attaching cabinet top to wallAttaching bottom to floor
Alternative 3 – Cabinets with plinth options +C164 and +C179
Attach the plinth to the floor with the L-brackets with which the cabinet is attached
to the transportation pallet.
76 Mechanical installation
To Next Page
Loading...
