Guidelines for planning the electrical
installation
Contents of this chapter
This chapter contains guidelines for planning the electrical installation of the drive.
Limitation of liability
The installation must always be designed and made according to applicable local laws
and regulations. ABB does not assume any liability whatsoever for any installation
which breaches the local laws and/or other regulations. Furthermore, if the
recommendations given by ABB are not followed, the drive may experience problems
that the warranty does not cover.
￭
North America
Installations must be compliant with NFPA 70 (NEC)
1)
and/or Canadian Electrical Code
(CE) along with state and local codes for your location and application.
1)
National Fire Protection Association 70 (National Electric Code).
5
Guidelines for planning the electrical installation 89
To Next Page
Loading...
