2/2 3AXD10000105027 Rev. Y
ACS880-07, -17, -37, -07CLC, -07LC, -17LC, -37LC, ACS880 multidrives and ACS880 liquid-
cooled multidrives: Prevention of unexpected start-up (option codes +Q950; +Q957),
Emergency stop (option codes +Q951; +Q952; +Q963; +Q964; +Q978; +Q979), Safely-limited
speed (option codes +Q965; Q966)
are in conformity with all the relevant safety component requirements of EU Machinery Directive
2006/42/EC, when the listed safety functions are used for safety component functionality.
The following harmonized standards have been applied:
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
EN 62061:2021 Safety of machinery – Functional safety of safety-related control
systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part
1: General principles for design
Safety of machinery – Safety-related parts of the control systems.
Part 2: Validation
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
The following other standard has been applied:
IEC 61508:2010, parts 1-3
Functional safety of electrical / electronic / programmable
electronic safety-related systems
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements - Functional
The products referred in this Declaration of conformity fulfil the relevant provisions of other
European Union Directives which are notified in Single EU Declaration of conformity
3AXD10000497305.
Authorized to compile the technical file: ABB Oy, Hiomotie 13, 00380 Helsinki, Finland
Helsinki, 19 Jun 2023
Signed for and on behalf of:
Peter Lindgren Vesa Tiihonen
Vice President, ABB Oy
Manager, Reliability and Quality, ABB Oy
330 The Safe torque off function
To Next Page
Loading...
