ABB ACS880-07 - Page 332

2/2
3AXD10001326695 Rev. C
ACS880-07, -17, -37, -07CLC, -07LC, -17LC, -37LC, ACS880 multidrives and ACS880 liquid-
cooled multidrives: Prevention of unexpected start-up (option codes +Q950; +Q957),
Emergency stop (option codes +Q951; +Q952; +Q963; +Q964; +Q978; +Q979), Safely-limited
speed (option codes +Q965; Q966)
are in conformity with all the relevant safety component requirements of the Supply of Machinery
(Safety) Regulations 2008, when the listed safety functions are used for safety component
functionality.
The following designated standards have been applied:
EN 61800-5-2:2007
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements - Functional
EN IEC 62061:2021 Safety of machinery – Functional safety of safety-related control
systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems.
Part 1: General principles for design
EN ISO 13849-2:2012
Safety of machinery – Safety-related parts of the control systems.
Part 2: Validation
EN 60204-1:2018
Safety of machinery – Electrical equipment of machines –
Part 1: General requirements
The following other standards have been applied:
EN 61508:2010, parts 1-3
Functional safety of electrical / electronic / programmable
electronic safety-related systems
EN 61800-5-2:2017
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements - Functional
The products referred in this declaration of conformity fulfil the relevant provisions of other UK
statutory requirements, which are notified in a single declaration of conformity 3AXD10001346556.
Authorized to compile the technical file:
ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT
Helsinki, 19 Jun 2023
Signed for and on behalf of:
Peter Lindgren Vesa Tiihonen
Vice President, ABB Oy Manager, Reliability and Quality, ABB Oy
332 The Safe torque off function