4 To add a supervision to a safe zone, tap to select the safe zone in the 3D
view, then tap Add.
5 Select a supervision function or guide.
xx2200000449
6 For supervision functions, select stop category, signal, and any other available
setting applicable for the function.
Tip
The functionality is described in detail in Application manual - Functional safety
and SafeMove.
Continues on next page
Product manual - CRB 1300 121
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4.1 The SafeMove configurator app on FlexPendant
Continued
To Next Page
Loading...
