Modify the Standstill Supervision settings
The Standstill Supervision functionality is not active by default. It can be added,
modified, and deactivated.
The CRB 1300 has support for both category 0 stop and category 1 stop.
xx2200000450
Modify the global supervision settings
The global supervision functions are not connected to a specific safe zone or safe
range. They can be added, modified, and deactivated.
Modify the Cyclic Brake Check settings
The Cyclic Brake Check functionality is active by default. It can be modified and
deactivated.
xx2200000451
Continues on next page
122 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4.1 The SafeMove configurator app on FlexPendant
Continued
To Next Page
Loading...
