ABB CRB 1300 - Page 230

NoteAction
Valid for cabling with rear inter-
face
Insert the cable package in the base and out from
the SMB side.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
2
xx2000001565
Valid for cabling with bottom inter-
face (option 3309-1)
xx2000001579
xx2000001566
Insert the cable package up through the axis-1
gearbox and out from the swing top cover side.
CAUTION
Make sure that no cables or hoses are twisted or
strained. Reroute if necessary.
3
Screw: M4x8 12.9 Lafre
2C2B/FC6.9 (2 pcs)
Refit the connector plate to the cable package.4
Tightening torque: 2.6 Nm
xx2000001564
Continues on next page
230 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the cable package
Continued