ABB CRB 1300 - Page 273

NoteAction
Axis-1 gearbox assembly cap. In-
cluded in special toolkit
3HAC076396-001.
Put the axis-1 gearbox on the workbench with the
gear side towards upside and place the assembly
cap to the gearbox.
2
xx2000001709
xx2000001710
Put the base onto the gearbox.3
xx2000001711
Turn the base together with the gearbox over to
the standing position.
4
xx2000001712
Remove the assembly cap.5
Continues on next page
Product manual - CRB 1300 273
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued