ABB CRB 1300 - Page 277

NoteAction
Grease: 3HAC029132-001Apply grease to the axis-1 mechanical stop slider
and refit it to the swing.
2
xx2000001703
Securing the arm system to the base
NoteAction
Gasket on swing: 3HAC067626-001Check the gasket.1
xx2000001704
Replace if damaged.
xx2000001702
Place the arm system slowly down to the base.2
xx2000001699
Align the oil plugs on the swing with the marked
screws on the axis-1 gearbox.
3
Continues on next page
Product manual - CRB 1300 277
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued