NoteAction
Magnetic oil plug, G 1/4":
3HAC037925-001
Check the oil plugs.
Replace if damaged.
2
Tightening torque: 10 Nm
xx2000001723
Gasket on swing: 3HAC067626-001Check the gasket.3
xx2000001704
Replace if damaged.
Grease: 3HAC029132-001Apply grease to the axis-1 mechanical stop slider
and refit it to the swing.
4
xx2000001703
Route the cable package through the swing and
out from the swing support side.
5
Place the swing down to the base.6
xx2000001699
Align the oil plugs on the swing with the marked
screws on the axis-1 gearbox.
7
Continues on next page
Product manual - CRB 1300 301
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
To Next Page
Loading...
