ABB CRB 1300 - Page 302

NoteAction
Screw: M8x45 12.9 Gleitmo
603+Geomet 500 (8 pcs)
Secure with screws and washers.8
Tightening torque:
36 Nm
xx2000000502
Refitting the swing to the lower arm
NoteAction
O-ring on lower arm: 3HAC061327-
015
For robots with protection class IP67 (option
3350-670)
1
Sealing ring, swing side:
3HAC065675-001
Check the sealing ring.
Replace if damaged.
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (8 pcs)
Tightening torque: 3.8 Nm
For robots with protection class
IP67 (option 3350-670)
xx2000002516
O-ring on swing: 3HAC061327-036Check the O-ring.2
xx2000001750
Replace if damaged.
Continues on next page
302 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued