Refitting the housing
Use these procedures to refit the housing.
Refitting the axis-4 mechanical stop slider
NoteAction
xx2000001732
Place the axis-4 mechanical stop slider in the
housing.
1
Refitting the housing
NoteAction
O-ring on tubular: 3HAC061327-
018
For robots with protection class IP67 (option
3350-670)
1
xx2000002519
Valid for CRB 1300-11/0.9 and CRB 1300-10/1.15
Check the O-ring.
Replace if damaged.
xx2000001728
Valid for CRB 1300-11/0.9 and CRB 1300-10/1.15
Refit the tubular to the housing.
2
xx2000001727
Valid for CRB 1300-7/1.4 and
Refit the extender unit to the housing.
3
Continues on next page
Product manual - CRB 1300 401
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the housing and extender unit
Continued
To Next Page
Loading...
