NoteAction
Screw: M3x35 12.9 Lafre
2C2B/FC6.9 (12 pcs)
Secure with screws.4
Tightening torque: 1.9 Nm
xx2000001675
Refitting the axis-4 mechanical stop flange
NoteAction
xx2000001673
Refit the axis-4 mechanical stop flange to the
gearbox.
1
xx2000001678
Make sure that :
• the block on the mechanical stop flange is
towards the upper side (process hub side).
• the notches on the extender unit and the
mechanical stop flange are aligned.
2
xx2000001677
Continues on next page
400 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the housing and extender unit
Continued
To Next Page
Loading...
