ABB CRB 1300 - Page 472

Refitting the lamp unit
Notice that the procedure is valid only when the lamp unit needs a replacement.
NoteAction
Multi-color lamp unit (16 mm):
3HAC081993-004
Refit the lamp unit.1
xx2200001003
Gasket for lamp unit cover:
3HAC082935-001
For robots with protection class IP67 (option
3350-670)
2
xx2200001004
Check the gasket.
Replace if damaged.
Lamp unit cover: 3HAC082320-001Refit the lamp unit cover.3
Screw: M3x8 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Tightening torque: 0.6 Nm
xx2200001002
Continues on next page
472 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued