Introduction to the manual
Contents of this chapter
This chapter introduces this manual.
Applicability
This manual applies to the FSPS-21 safety functions fieldbus module, revision A.
Compatibility
￭ Drives
The FSPS-21 safety fieldbus module is compatible with:
• ACS880 drives
• ACS880 primary control program version 2.80 or later
• ACS580 drives
• ACS580 standard control program version 2.05 or later
• ACS380 drives
• ACS380 machinery control program version 2.05 or later
￭ Tools
• Drive composer pro: version 1.7 or later
• For ABB PLCs: Automation builder 1.0 or later (includes PS501 Control Builder Plus
version 2.3.0), safety license PS501-S
• For Siemens PLCs: SIMATIC Step 7 V5.5 + S7 Distributed Safety V5.4 and SIMATIC
Step 7 (TIA Portal) + Step 7 Safety Advanced
2
Introduction to the manual 15
To Next Page
