ABB FSPS-21 - Safety Data and Basic Safety Information

PurposeServicePort
PROFINET RT Multicast.PROFINET34963 (TCP/UDP)
Note:
Used only when PROFINET IO protocol is selected.
PROFINET Context Manager.PROFINET34964 (TCP/UDP)
Note:
Used only when PROFINET IO protocol is selected.
Used for Ethernet tool communication.HTTP80 (TCP)
DHCP clientDHCP68 (UDP)
Note:
Used only when IP configuration method is selected as "Dyn IP
DHCP".
• Auto discovery protocol
• Used by ControlBuilder plus (IP Configuration tool) and Drive
composer pro tools
• Discovers ABB-specific Ethernet devices in a local network
segment, by listening to and responding to UDP broadcasts.
ABB Netconfig24576 (UDP)
Simple Network Management Protocol (SNMP).SNMP161 (UDP)
Note:
Used only when PROFINET IO protocol is selected.
Safety functions
Stopping functions
Safe torque offSTO
Safe stop 1, time-controlledSS1-t
Safety data
￭ General
To determine the SIL/PL capability of the whole safety function where the FSPS-21 is
included, the failure rates (PFDavg/PFH) of all components implementing the safety function
(see the figure below) must be added.
196 Technical data