Maintenance
Contents of this chapter
This chapter explains replacement of the FSPS-21 module in case of a module failure,
reinstalling the FSPS-21 module to another drive, updating the firmware of the drive where
the FSPS-21 module is installed, FSPS-21 module update and decommissioning as well
as proof tests.
WARNING!
Read and obey the instructions in chapter Safety instructions (page 13) and chapter
Safety instructions in the drive hardware manual. If you ignore them, injury or
death, or damage to the equipment can occur.
Planning
All maintenance and the repair actions on a safety critical system are safety critical. You
must plan and perform them accordingly.
Before making any changes, make sure to back-up drive parameters.
Tools
You need the Drive composer PC tool or a control panel to perform the maintenance
procedures.
FSPS-21 configuration back-up
￭ Contents of this chapter
This chapter presents the settings for FSPS-21 configuration backup.
19
Maintenance 187
To Next Page
Loading...
