Electrical installation
Contents of this chapter
This chapter contains general cabling instructions and instructions on connecting the FSPS-21
module to the Ethernet network and the drive.
Necessary tools and instructions
See the drive hardware manual.
General cabling instructions
• Arrange the bus cables as far away from the motor cables as possible.
• Avoid parallel runs.
• Use bushings at cable entries.
Connecting the FSPS-21 to the Ethernet network and to
the STO of the drive
WARNING!
Obey the safety instructions. If you ignore the safety instructions, injury or death
can occur. If you are not a qualified electrician, do not do electrical work.
9
Electrical installation 39
To Next Page
Loading...
