Appendix B – ABB IP configuration tool
Contents of this chapter
This chapter shows how to use the ABB IP configuration tool to:
• find configured and unconfigured FSPS-21 adapter modules in the network
• rewrite the IP configuration of the adapter modules.
Installation
The ABB IP configuration tool is part of the ABB Automation Builder software. No separate
installation is needed.
Finding adapter modules in the network
1. Open the ABB IP configuration tool.
2. Click the Scan button.
The FSPS-21 adapter modules present in the network appear on the results list.
22
Appendix B – ABB IP configuration tool 209
To Next Page
Loading...
