Mechanical installation
Contents of this chapter
This chapter contains a delivery checklist and instructions on installing the module.
Necessary tools and instructions
You will need a Torx TX10 screwdriver to secure the FSPS-21 module to the drive. See
also the drive hardware manual.
Unpacking and examining the delivery
1. Open the option package.
2. Make sure that the package contains:
• fieldbus module, type FSPS-21
• STO cable (with a connector suitable for ACS880 series drives)
• quick guide
3. Make sure that there are no signs of damage.
8
Mechanical installation 35
To Next Page
Loading...
