EasyManua.ls Logo

ABB FSPS-21 - Connection Data; Ambient Conditions

ABB FSPS-21
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Three bicolor LEDs (HOST, MODULE, NETWORK/NET)Indicators
Printed circuit board conformal coatedGeneral
72 gWeight
Complies with EMC standards EN 61800-3:2004 and IEC 61000-6-7:2014EMC
Max. STO cable length: 3m
Connection data
A 20-pin connector to the driveConnectors
RJ-45 connector to Ethernet (X1)
RJ-45 connector for chaining another adapter module (X2)
STO connector
Ambient conditions
Transportation in the
protective package
Storage in the protective
package
Operation installed for station-
ary use
samesame0…1000 m (0…3300 ft) above
sea level, no derating required
1000…2000 m (3300…6600 ft)
above sea level, air outside the
module derated to -15…+49 °C
(+5…+120 °F) 2000…4000 m
(6600…13200 ft) above sea
level, air outside the module de-
rated to -15…+40 °C
(+5…+104 °F)
Altitude (installa-
tion site)
-40…+70 °C (-40…+158
°F)
-40…+70 °C (-40…+158
°F)
-15…+70 °C (+5…+158 °F)Air temperature
samesame5...95%Relative humidity
No condensation allowed.
If corrosive gases are present,
the maximum allowed humidity
is 60%.
samesameNo contaminants, conductive
dust or corrosive dust allowed.
Contamination
levels
Use at least IP54 enclosure in
an environment where conduct-
ive dust or corrosive dust exists.
samesameFrequency range 10...150 HzVibration
Amplitude ±0,075 mm,
10...57,56 Hz
IEC 60068-2-6, Test
Fc (2007-12)
Constant peak acceleration
10 m/s
2
(1 g
n
), 57,76...150 Hz
194 Technical data

Table of Contents

Related product manuals