￭ Configuring Media Redundancy Protocol (MRP) with TIA14
You can configure MRP for Siemens PLC with TIA14 after setting the basic configuration.
For instructions of basic configuration, see section Configuring FSPS-21 with
TIA14 (page 136).
To configure an MRP with TIA portal, proceed as follows:
1. In TIA portal Device overview, expand PLC and select the desired PROFINET interface.
PROFINET interface view is displayed.
2. In PROFINET interface view, click General tab and select Media Redundancy and then
select Manager (auto) role for the PLC.
66 PROFINET IO – Start-up
To Next Page
Loading...
