ABB FSPS-21 - Page 182

What to doAUX code(s)DescriptionWarningCode
Check the value of
parameter 51.24 F-des-
tination address.
0000 0001
F_dest address does
not match to con-
figured value
PROFIsafe configura-
tion problem. Gather
the AUX codes from
this warning and con-
tact ABB.
FSx safety bus
warning
0xA7DD
Check PLC program
status.
0000 0002
PLC gave illegal
f_dest address If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0003
F_source address
does not match to
configured value
If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0004
PLC gave illegal
f_source address If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0005
PLC gave illegal wd-
time value If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0006
PLC requested sil is
higher than we are
capable
If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0007
PLC gave config
which has conflict
with f_crc_length
If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0008
PLC gave config
which has conflict
with f_par_version
If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
Check PLC program
status.
0000 0009
PLC gave config
which has conflict
with f_block_id
If warning persists,
gather the AUX codes
from this fault and con-
tact ABB.
182 Fault tracing