ABB IP Touch 7 - Unit of Temperature; Set Value Is Relative; Heating;Cooling Switchover; Fan Coil Control During Heating Mode

Control elements and application parameter
Control element "RTC control element"
Product manual 2CKA001473B5023
│
103
2.11.7 Unit of temperature
Options: °C
°F
The parameter is used to specify the unit with which the temperature is displayed.
2.11.8 Set value is relative
Options: No
Yes
The parameter is used to specify whether the set value for devices with display is displayed as
relative value, e.g. -5°C - +5°C.
2.11.9 Heating/cooling switchover
Options: Deactivated
Activated
The parameter is used to specify whether the RTC control element can be switched over
between heating and cooling mode.
2.11.10 Fan coil control during heating mode
Options: Deactivated
Activated
The parameter is used to specify whether the fan coil fan is activated during heating mode.
2.11.11 Fan coil control during cooling mode
Options: Deactivated
Activated
The parameter is used to specify whether the fan coil fan is activated during cooling mode.
2.11.12 Setting the temperature unit via object
Options: No
Yes
The parameter is used to specify whether it is possible to set the temperature unit via a
communication object.
2.11.13 Enable 1-bit communication object "Disable"
Options: Deactivated
Activated