ABB IP Touch 7 - Basic Stage Cooling; Basic Stage Cooling - Status Object Cooling; Basic Stage Cooling - Mode of the Control Value

Control elements and application parameter
Application "Internal RTC"
Product manual 2CKA001473B5023
│
158
2.21.55 Basic stage cooling
Note
Only available when the "Extended settings" parameter under "Cooling control"
is set on "Yes".
2.21.56 Basic stage cooling — Status object cooling
Options: Deactivated
Activated
This parameter enables the "Status cooling" communication object.
2.21.57 Basic stage cooling — Mode of the control value
Options: Normal
Inverse
The mode of the control value can be used to adapt the control value to de-energised opened
(normal) or de-energised closed (inverse) valves.
– Normal: Value 0 means "Valve closed".
– Inverse: Value 0 means "Valve open".
