Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA001473B5023
27
1.7.2 Editing operating pages
Adjust name of the page
1. Open the "Navigation" tab in the library area.
2. Select the operating page in the tree structure.
3. In the "Parameter" area, click in the name input field and enter a new name. The length of
the name is limited to 60 characters.
You can also change the name of the page in the library area.
1. In the tree structure, click on the page entry with the right mouse button.
– A pop-up menu opens.
2. Click on "Rename" and change the name.
Move page within the tree structure
1. In the tree structure, click on the page entry with the right mouse button.
– A pop-up menu opens.
2. Click on "Up" or "Down".
– The page is moved accordingly.
Notice
Operating pages can also be shifted via drag and drop to a different position in
the tree structure.
Copy the page and paste it again
1. In the tree structure, click on the page entry with the right mouse button.
– A pop-up menu opens.
2. Click on "Copy".
– The page is copied with all entries.
3. Select "Start pages" or a floor or a room.
4. Click on the entry with the right mouse button.
5. Click on "Insert" in the pop-up menu.
– The copied page is inserted.
To Next Page
Loading...
