ABB IP Touch 7 - Speech Volume Preset [%]; Application Fault and Alarm Messages - Global Settings; Use of Fault and Alarm Messages; Page PIN-Protected

Control elements and application parameter
Application "Fault and alarm messages" - Global settings
Product manual 2CKA001473B5023
│
116
2.14.4 Speech volume preset [%]
Options: Setting option from 10 - 100
Preset of speech volume in percent.
2.15 Application "Fault and alarm messages" - Global settings
2.15.1 Use of fault and alarm messages
Options: Deactivated
Activated
The parameter is used to specify whether the fault and alarm messages are displayed.
– Disabled: No display in the panel. No additional parameters available.
– Activated: The following parameters appear:
2.15.2 Page PIN-protected
Options: Deactivated
Activated
The parameter is used to specify whether the fault and alarm messages application page is
protected by a PIN code.
– Deactivated: The application page is not protected.
– Activated: The application page can only be called up by entering a PIN code. The following
supplementary parameter is available:
PIN code level:
Options: Level 1
Level 2
Level 3
Level 4
Level 5
The parameter is used to specify the PIN code level for the application page.
Notice
Details about the PIN code, .
