ABB IP Touch 7 - Establishing a Speech and Video Connection; Opening the Door

Operation
Product manual 2CKA001473B5023
│
206
4.4.1 Establishing a speech and video connection
1. The function is called up via the receiver button.
Fig. 18: Receiver button
The following functions are available while establishing the speech and video connection.
Function:
■
Setting the volume by tapping the corresponding buttons (plus and minus).
If several outdoor stations or external cameras are connected:
■
Select the camera from the list by tapping the arrow button.
– The designation of the camera is then displayed.
– The current picture of the camera appears in the video area.
2. The connection can be terminated by pressing the button.
Fig. 19: Replacing the
receiver button
4.4.2 Opening the door
1. The function is called up via the key button.
Fig. 20: Key button
Actuating the door opener makes the following function available.
Function:
■
Door operner is actuated or the "Automatic door opener" is active.
– A white key" icon is displayed.
– The door opener is now switched on.
