ABB IP Touch 7 - Scene Control Element; Name of the Control Element; Function of the Control Element; Start Scene at Selection

Control elements and application parameter
"Scene" control element
Product manual 2CKA001473B5023
│
87
2.9 "Scene" control element
2.9.1 Name of the control element
Options: <Name>
Naming of the scene control element.
The length of the name is limited to 36 characters.
2.9.2 Function of the control element
Options: Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Scene (magenta)" has been made available for functions of this type.
2.9.3 Start scene at selection
Options: Deactivated
Activated
The parameter is used to specify whether the scene is executed directly with a click on the
control element or whether it must be started again separately.
2.9.4 Long operation after...
Options: Setting option from 0.3 - 10 seconds
The parameter is used to specify how long the button must be pressed to recognize a long
operation.
2.9.5 Number of scenes [1 - 10]
Options: Setting option from 1 - 10
The parameter is used to specify the number of scenes available in the selection list.
