ABB IP Touch 7 - Communication Objects

Communication objects
Application "Internal RTC"
Product manual 2CKA001473B5023
│
178
3 Communication objects
Um einen schnell en Überblick über die Funkti onsmöglichkeit des Dimmers zu erhalten, sind al le Kommunikationsobj ekte in einer Übersic htstabelle aufgeführ t. Die detailliert e Funktion kann in der anschli eßenden Beschreibung der einzelnen Kommunikat ionsobjekte nachg elesen werden.
For a quick overview of the options of the ABB RoomTouch
®
5, FM, all communication objects
are listed in an overview table. The detailed function can be read in the description following the
individual communication objects.
Notice
Some communication objects are dynamic and only visible when the
corresponding parameters have been activated in the application program.
The communication objects are listed in the following overview:
Name
Object
function
Length Data type Flags
K L S U A
Binary input Output 1 byte
[5.001]
Percent
(0 - 100%)
K - - U -
Temperature sensor Output 2 bytes
[9.001]
Temperature
(°C)
K - - U -
Block all time programs Input 1 bit
[1.003]
Enable
K - S - A
Activate the holiday function Input 1 bit
[1.010]
Start/Stop
K - S - A
Holiday status Output 1 bit
[1.010]
Start/Stop
K - S U A
Display brightness Input 1 byte
[5.001]
Percent
(0 - 100%)
K - S - A
Background illumination
ON/OFF
Input 1 bit
[1.001]
Switching
K - S - A
Background illumination
status
Output 1 bit
[1.001]
Switching
K - - U A
Screen saver ON/OFF Input 1 bit
[1.001]
Switching
K - S - A
Screen saver status Output 1 bit
[1.001]
Switching
K - - U -
Primary function Output 1 bit
[5.001]
Switching
K - S U A
Selection of temperature unit Input 1 bit
[1.001]
Switching
K - S - A
Inside temperature Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Outside temperature Input 2 bytes
[9.001]
Temperature
(°C)
K - S - A
Commissioned Output 1 bit
[1.001]
Switching
K - - U -
Switching between dark and
Input 1 bit
[1.001]
K - S - A