ABB IP Touch 7 - Application Door Communication; Use of Door Communication; Page PIN-Protected; Ring Tone Volume Preset [%]

Control elements and application parameter
Application "Door communication"
Product manual 2CKA001473B5023
│
115
2.14 Application "Door communication"
2.14.1 Use of door communication
Options: No
Yes
The parameter is used to specify whether an application page is displayed in the panel for the
door communication.
– No: No application page is displayed. No additional parameters available.
– Yes: An application page is displayed. The following supplementary parameters are
displayed:
2.14.2 Page PIN-protected
Options: No
Yes
The parameter is used to specify whether the application page for the door communication is
protected by a PIN code.
– No: The application page is not protected.
– Yes: The application page can only be called up by entering a PIN code. The following
supplementary parameter is available:
PIN code level:
Options: Level 1
Level 2
Level 3
Level 4
Level 5
The parameter is used to specify the PIN code level for the application page.
Note
Details about the PIN code, or .
2.14.3 Ring tone volume preset [%]
Options: Setting option from 10 - 100
Preset of ringtone volume in percent.
