ABB IP Touch 7 - Enable 1-Bit Communication Object Disable

To Next Page

To Previous Page

Control elements and application parameter

"Switch" control element

Product manual 2CKA001473B5023

│

2.1.8 Enable 1-bit communication object "Disable"

Options: No

Yes

There is the option of temporarily disabling the function via an additional communication object

"Disable".



Main Page

Table of Contents2
Commissioning of the KNX Function Via DCA (from ETS5)11
Integration into the KNX System (ETS)11
Prerequisites11
Knxnet/Ip Secure12
Special Features During Commissioning13
Network Settings14
Installation of the IP Touch ETS App14
Installation Sequence15
Integrating the IP Touch into the ETS15
Further KNX Settings in the Device16
Overview of the DCA Commissioning Tool17
Starting the DCA17
Screen Areas of the DCA18
Explanation of the Basic Structure (Terms)20
Commissioning Sequence22
Configuring Basic Settings for the Panel22
Basic Settings (System Settings) of the Panel23
Creation of the Navigation Structure26
Creating Operating Pages (Start26
Editing Operating27
Configuration of the Operating29
Switch" Control Element31
Control Element "Rocker Switch31
Dimmer" Control Element31
Control Element: "Dimmer Slider31
Operation of "RGBW" Control Element31
Control Element: "Value Slider32
Blind" Control Element32
Control Element "Fan Switch32
Scene" Control Element32
Display" Control Element32
Control Element "RTC Control Element32
Page Link" Control Element33
Control Element "Audio Control33
Editing Control Elements34
Delete Control Element34
Copy Control Element35
Add Control Element to Favourites List35
Configuration of Applications and Application36
Application "Door Communication36
Application "Fault and Alarm Messages37
Application "Scene Actuator38
Application "Presence Simulation38
Application "Time Programs39
Application "Logical Functions39
Application "Internal RTC40
Favourite Control Elements41
Editing Communication Objects42
Editing Group Addresses43
Additional Tools (Functions)44
Import44
Export45
Preview45
Reset Layout45
Reset All45
Control Elements and Application Parameter46
Switch" Control Element46
Name of the Control Element46
Function of the Control Element46
Size of the Button46
Type of Switch46
Object Type 1 / Value 248
Status Control Element (Icon/Text) Is Operated Via a Separate Object51
Icon Type51
Enable 1-Bit Communication Object "Disable52
Control Element "Rocker Switch53
Name of the Control Element53
Function of the Control Element53
Size of the Button53
Icon Type54
Status Control Element (Icon/Text) Is Operated Via a Separate Object54
Object Type55
Enable 1-Bit Communication Object "Disable58
Dimmer" Control Element59
Name of the Control Element59
Function of the Control Element59
Size of the Button59
Icon Type59
Icon for on / Icon for off60
Position for DIM up Icon60
Icon for Dimming up / Icon for Dimming down60
Status Control Element (Icon) Is Operated Via a Separate Object60
Status of Dimming Value Is Controlled by a Separate Object60
Manner of Dimming62
Enable 1-Bit Communication Object "Disable62
Control Element: "Dimmer Slider64
Name of the Control Element64
Function of the Control Element64
Size of the Button64
Icon Type64
Icon for on / Icon for off65
Slider from65
Status Control Element (Icon) Is Operated Via a Separate Object65
Display Value in Control Element66
Slider Sends67
Brightness Change [%]67
Enable 1-Bit Communication Object "Disable67
Operation of "RGBW" Control Element68
Name of the Control Element68
Function of the Control Element68
Display Value in Control Element68
Type of Colour/White Lamp69
Brightness Change [%]71
Telegram Is Repeated Every [Sec.]71
Enable 1-Bit Communication Object "Disable71
Control Element: "Value Slider72
Name of the Control Element72
Function of the Control Element72
Size of the Button72
Slider from72
Display Value in Control Element73
Slider Sends73
Object Type74
Enable 1-Bit Communication Object "Disable75
Blind" Control Element76
Name of the Control Element76
Function of the Control Element76
Size of the Button76
Type of Control77
Icon Type78
Status Control Element (Icon) Is Operated Via a Separate Object79
Enable 1-Bit Communication Object "Disable80
Control Element "Fan Switch81
Name of the Control Element81
Function of the Control Element81
Size of the Button81
Deactivation of Switch-Off Option81
Icon Type82
Telegram Is Repeated Every [Sec.]82
Number of Levels83
Object Type83
Display Status85
Enable 1-Bit Communication Object "Disable86
Scene" Control Element87
Name of the Control Element87
Function of the Control Element87
Start Scene at Selection87
Long Operation after87
Number of Scenes [1 - 10]87
Scene Number X [1 - 64]88
Name of Scene X88
Saving Scene X with a Long Press88
Enable 1-Bit Communication Object "Disable88
Display" Control Element89
Name of the Control Element89
Function of the Control Element89
Type of Display Element89
Type of Display Element - Status Display - Size of the Button90
Type of Display Element - Status Display - Object Type90
Type of Display Element - Value Display - Size of the Button91
Type of Display Element - Value Display - Object Type92
Type of Display Element - Linear Measurement Display - Measurement Display with Colour Display93
Type of Display Element - Linear Measurement Display - Display Value in Control Element94
Type of Display Element - Linear Measurement Display - Object Type95
Type of Display Element - Round Measurement Display96
Type of Display Element - Wind Rose97
Type of Display Element - Wind Force - Size of the Button97
Type of Display Element - Wind Force - Unit98
Type of Display Element - Temperature - Size of the Button98
Type of Display Element - Temperature - Unit98
Type of Display Element - Rain - Size of the Button98
Type of Display Element - Rain - Text for Rain98
Type of Display Element - Rain - Text for no Rain99
Type of Display Element - Twilight - Size of the Button99
Type of Display Element - Twilight - Unit99
Type of Display Element - Brightness99
Type of Display Element - CO - Size of the Button99
Type of Display Element - CO - Unit99
Type of Display Element - Moisture - Size of the Button99
Type of Display Element - Moisture - Unit100
Type of Display Element - Air Pressure - Size of the Button100
Type of Display Element - Air Pressure - Unit100
Enable 1-Bit Communication Object "Disable100
Control Element "RTC Control Element101
Name of the Control Element101
Function of the Control Element101
Additional Functions/Objects101
Delay Time During Reading of Telegrams after Reset [Sec.]101
Input for Temperature Reading102
Display Actual Temperature102
Unit of Temperature103
Set Value Is Relative103
Heating/Cooling Switchover103
Fan Coil Control During Heating Mode103
Fan Coil Control During Cooling Mode103
Setting the Temperature Unit Via Object103
Enable 1-Bit Communication Object "Disable103
Page Link" Control Element105
Name of the Control Element105
Function of the Control Element105
Size of the Button105
Linked with Page105
Enable 1-Bit Communication Object "Disable106
Control Element "Audio Control107
Name of the Control Element107
Function of the Control Element107
Number of Sources107
Use of Play Button108
Use of Pause Button108
Use of Stop Button109
Use of Forward Button110
Use of Return Key111
Use of Button for Mute112
Use of Volume Button113
Use of ON/OFF Button114
Enable 1-Bit Communication Object "Disable114
Application "Door Communication115
Use of Door Communication115
Page PIN-Protected115
Ring Tone Volume Preset [%]115
Speech Volume Preset [%]116
Application "Fault and Alarm Messages" - Global Settings116
Use of Fault and Alarm Messages116
Page PIN-Protected116
Enable Export117
Automatic Archiving at an Acknowledgement117
Sound for Alarm117
Sound for Notice118
Signal Tone for Error118
Default Setting for Signal Tone Volume [%]118
Application "Fault and Alarm Messages" - Settings of the Individual Messages119
Name of Message119
Type of Message119
Type of Alarm119
Application "Scene Actuator121
Name of Scene Actuator121
Number of Participants121
Number of Scenes121
Overwriting Scenes During Download121
Telegram Delay121
Object Type X122
Name of Scene124
Scene Number124
Light Scenes Can be Started with124
Light Scene Can be Stored124
Object X Is to be Changed124
Application "Presence Simulation125
Use of Presence Simulation125
Page PIN-Protected125
Enable Export126
Delay Time up to Activation [Min.]126
Object Type 1-20126
Application "Time Programs127
Page PIN-Protected127
Overwriting Time Programs During Download127
Application "Logical Functions128
Channel X - Application128
Application "Internal RTC139
General - Device Function139
General - Control Function139
General - Operating Mode after Reset140
General - Send Cyclic "In Operation" (Min)141
General - Additional Functions/Objects141
General - Delay Time for Read Telegrams after Reset [S]141
Heating Control - Control Value Type142
Heating Control - Heating Type143
Heating Control - P-Component (X 0.1°C)143
Heating Control - I-Component (Min.)144
Heating Control - Extended Settings144
Basic Stage Heating144
Basic Stage Heating - Status Object Heating144
Basic Stage Heating - Mode of the Control Value144
Basic Stage Heating - Hysteresis (X 0.1°C)145
Basic Stage Heating - Control Value Difference for Sending of Heating Control Value145
Basic Stage Heating - Cyclic Sending of the Control Value (Min)145
Basic Stage Heating - PWM Cycle Heating (Min)146
Basic Stage Heating - Maximum Control Value (0 - 255)146
Basic Stage Heating - Minimum Control Value for Basic Load (0 to 255)146
Settings of Basic Load - Minimum Control Value for Basic Load > 0147
Basic Load Settings - Basic Load Active When Controller Is off147
Setpoint Settings - Setpoint Temperature for Heating Comfort (°C)148
Setpoint Settings - Reduction for Standby Heating (°C)148
Setpoint Settings - Reduction for ECO Heating (°C)148
Setpoint Settings - Set-Point Temperature for Frost Protection (°C)149
Setpoint Settings - Send Current Setpoint149
Setpoint Settings - Cyclic Sending of the Current Set-Point Temperature (Min)149
Setpoint Adjustment - Maximum Manual Increase During Heating Mode (0 - 9°C)149
Setpoint Adjustment - Maximum Manual Reduction During Heating Mode (0 - 9°C)150
Setpoint Adjustment - Resetting of the Manual Adjustment for Receipt of a Basic Setpoint150
Setpoint Adjustment - Resetting the Manual Adjustment for Change of Operating Mode150
Setpoint Adjustment - Resetting the Manual Adjustment Via Object151
Setpoint Adjustment - Permanent Storage of On-Site Operation151
Temperature Reading - Inputs of Temperature Reading151
Temperature Reading - Inputs of Weighted Temperature Reading151
Temperature Reading - Weighting of Internal Measurement (0 to 100%)152
Temperature Reading - Weighting of External Measurement (0 to 100%)152
Temperature Reading - Weighting of External Measurement 2 (0 to 100%)152
Temperature Reading - Cyclic Sending of the Actual Temperature (Min)152
Temperature Reading - Difference of Value for Sending the Actual Temperature (X 0.1°C)153
Temperature Reading - Adjustment Value for Internal Temperature Measurement (X 0.1°C)153
Temperature Reading - Monitoring Time for Temperature Reading (0 = no Monitoring) (Min)153
Temperature Reading - Control Value for Fault (0 - 255)154
Alarm Functions - Frost Alarm Temperature for HVAC and RHCC Status (°C)154
Alarm Functions - Heat Alarm Temperature for RHCC Status (°C)154
Control of Additional Heating Stage - Temperature Difference to Basic Stage (X 0.1°C)154
Control of Additional Heating Stage - Additional Heating Type155
Control of Additional Heating Stage - P-Component (X 0.1°C)155
Control of Additional Heating Stage - I-Component (Min)156
Cooling Control - Cooling Type156
Cooling Control - P-Component (X 0.1°C)157
Cooling Control - I-Component (Min.)157
Cooling Control - Extended Settings157
Basic Stage Cooling158
Basic Stage Cooling - Status Object Cooling158
Basic Stage Cooling - Mode of the Control Value158
Basic Stage Cooling - Hysteresis (X 0.1°C)159
Basic Stage Cooling - Cyclic Sending of the Control Value (Min)159
Basic Stage Cooling - PWM Cycle Cooling (Min)160
Basic Stage Cooling - Maximum Control Value (0 - 255)160
Basic Stage Cooling - Minimum Control Value for Basic Load (0 to 255)160
Settings of Basic Load - Minimum Control Value for Basic Load > 0161
Basic Load Settings - Basic Load Active When Controller Is off161
Setpoint Settings - Setpoint Temperature for Cooling Comfort (°C)162
Setpoint Settings - Increase for Standby Cooling (°C)162
Setpoint Settings - Increase for ECO Cooling (°C)162
Setpoint Settings - Set-Point Temperature for Heat Protection (°C)163
Setpoint Settings - Send Current Setpoint163
Setpoint Settings - Cyclic Sending of the Current Set-Point Temperature (Min)163
Setpoint Adjustment - Maximum Manual Increase During Cooling Mode (0 - 9°C)163
Setpoint Adjustment - Maximum Manual Reduction During Cooling Mode (0 - 9°C)164
Setpoint Adjustment - Resetting of the Manual Adjustment for Receipt of a Basic Setpoint164
Setpoint Adjustment - Resetting the Manual Adjustment for Change of Operating Mode164
Setpoint Adjustment - Resetting the Manual Adjustment Via Object165
Setpoint Adjustment - Permanent Storage of On-Site Operation165
Temperature Reading - Inputs of Temperature Reading165
Temperature Reading - Inputs of Weighted Temperature Reading166
Temperature Reading - Weighting of Internal Measurement (0 to 100%)166
Temperature Reading - Weighting of External Measurement (0 to 100%)166
Temperature Reading - Weighting of External Measurement 2 (0 to 100%)166
Temperature Reading - Cyclic Sending of the Actual Temperature (Min)166
Temperature Reading - Difference of Value for Sending the Actual Temperature (X 0.1°C)167
Temperature Reading - Adjustment Value for Internal Temperature Measurement (X 0.1°C)167
Temperature Reading - Monitoring Time for Temperature Reading (0 = no Monitoring) (Min)168
Temperature Reading - Control Value for Fault (0 - 255)168
Alarm Functions - Condensate Water Alarm168
Alarm Functions - Dew Point Alarm169
Alarm Functions - Frost Alarm Temperature for HVAC and RHCC Status (°C)169
Alarm Functions - Heat Alarm Temperature for RHCC Status (°C)169
Summer Compensation169
Summer Compensation - Summer Compensation170
Summer Compensation -- (Lower) Starting Temperature for Summer Compensation (°C)171
Summer Compensation - Offset of the Set-Point Temperature for the Entry into Summer Compensation (X 0.1°C)171
Summer Compensation - (Upper) Exit Temperature for Summer Compensation (°C)171
Summer Compensation - Offset of the Set-Point Temperature for the Exit from Summer Compensation (X 0.1°C)172
Control of Additional Cooling Stage - Cooling Type173
Control of Additional Cooling Stage - P-Component (X 0.1°C)173
Control of Additional Cooling Stage - P-Component (Min)174
Combined Heating and Cooling Modes174
Combined Heating and Cooling Modes - Switchover of Heating/Cooling174
Combined Heating and Cooling Modes - Operating Mode after Reset175
Combined Heating and Cooling Modes - Heating/Cooling Control Value Output175
Setpoint Settings - Setpoint for Heating Comfort = Setpoint for Cooling Comfort175
Setpoint Settings - Hysteresis for Switchover Heating/Cooling (X 0.1°C)176
Setpoint Settings - Setpoint Temperature for Heating and Cooling Comfort (°C)176
Temperature Reading - Operating Mode for Fault176
Combined Heating and Cooling Modes - Additional Heating/Cooling Stage Control Value Output177
Communication Objects178
Operation189
General Control and Display Functions189
Control Elements191
Basic Structures of Control Elements192
Additional Basic Principles193
Adjustable Control Elements194
Special Functions201
Editing201
Call-Up and Editing of the Favourites List202
Access to204
Return to the Previous Page204
Operating Actions of the "Door Communication" Application205
Establishing a Speech and Video Connection206
Opening the Door206
Activating Mute (Mite Timer)207
Switching Light207
Events and Image Storage / History208
Control Actions of Additional Applications209
Presence Simulation209
Fault and Alarm Messages211
Time Programs214
Inserting the Micro SD Card (SDHC)218
System Settings218
Update221
Transfer of PID File (Configuration File)221
Case Studies222
Legend222
Basic Information223
Practice-Oriented Examples224
Multifamily House with Door Communication and KNX Within the Flat224
One-Family House with Door Communication and KNX226
One-Family House with Door Communication and KNX, Including Single Residential Unit227
Notes228
Index229

ABB IP Touch 7 - Enable 1-Bit Communication Object Disable

Table of Contents

Related product manuals