ABB IP Touch 7 - Control Element: Value Slider; Name of the Control Element; Function of the Control Element; Size of the Button

Control elements and application parameter
Control element: "Value slider"
Product manual 2CKA001473B5023
│
72
2.6 Control element: "Value slider"
2.6.1 Name of the control element
Options: <Name>
Naming the slider control element, e.g. name of the device that is to be controlled.
The length of the name is limited to 36 characters.
2.6.2 Function of the control element
Options: Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Not defined (grey)" has been made available for functions of this type.
2.6.3 Size of the button
Options: 2 columns
3 columns
The parameter is used to specify whether the control element occupies two columns (two
buttons or control frames) or three columns (three buttons or control frames).
2.6.4 Slider from
Options: Left to right
Right to left
The parameter is used to specify whether the slider is to shift from left to right or from right to
left.
