ABB IP Touch 7 - One-Family House with Door Communication and KNX

Case studies
Product manual 2CKA001473B5023
│
226
6.3.2 One-family house with door communication and KNX
The KNX IP interface forms the interface between the local unit network and the KNX
installations and operates according to the KNXnet/IP specification.
Notice
The IP addresses are assigned by the router.
Fig. 29: Overview: one-family house with door communication and KNX
[A] Welcome IP door communication
[B] Private area
*)
If Welcome IP door communication is not used, the Smart Access Point is not available
under [B].
For further information on IP address assignment, see see chapter 6.2 “Basic information“ on
page 223.
