ABB IP Touch 7 - Blind Control Element; Name of the Control Element; Function of the Control Element; Size of the Button

Control elements and application parameter
"Blind" control element
Product manual 2CKA001473B5023
│
76
2.7 "Blind" control element
2.7.1 Name of the control element
Options: <Name>
Naming the blind switch control element, e.g. name of the window whose blind is to be
switched.
The length of the name is limited to 36 characters.
2.7.2 Function of the control element
Options: Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Blind (blue)" has been made available for functions of this type.
2.7.3 Size of the button
Options: 1 column
2 columns
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
