Control elements and application parameter
"Display" control element
Product manual 2CKA001473B5023
93
Decimal places:
Options: Setting option from 0 - 2
The parameter is used to specify the number of decimal places of the displayed value.
The number is limited to 2 places.
Thousands separator:
Options: Deactivated
Activated
The parameter is used to specify whether a thousands separator is displayed in the value.
Minimum object value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the smallest value that is sent via telegrams to the display
element.
Any value within the limits specified by the object type and its value range can be entered.
Maximum object value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the largest value that is sent via telegrams to the display
element.
Any value within the limits specified by the object type and its value range can be entered.
Displayed minimum value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the smallest value that is displayed in the display element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Minimum object value".
Displayed maximum value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the largest value that is displayed in the display element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Maximum object value".
2.10.8 Type of display element — Linear measurement display — Measurement display with
colour display
Options: Deactivated
Activated
The parameter is used to specify whether a colour display follows. For this the communication
objects "Switch alarm", "Switch warning", and "Switch information" are enabled.
To Next Page
Loading...
