ABB IP Touch 7 - Control Element: Dimmer Slider; Name of the Control Element; Function of the Control Element; Size of the Button

Control elements and application parameter
Control element: "Dimmer slider"
Product manual 2CKA001473B5023
│
64
2.4 Control element: "Dimmer slider"
2.4.1 Name of the control element
Options: <Name>
Naming the slider control element, e.g. name of the lamp that is to be dimmed.
The length of the name is limited to 36 characters.
2.4.2 Function of the control element
Options: Not defined (grey)
Light (yellow)
Blind (blue)
Temperature (orange)
Scene (magenta)
Alarm (red)
Feedback (green)
The parameter is used to specify the colour of the function line.
"Light (yellow)" has been made available for functions of this type.
2.4.3 Size of the button
Options: 2 columns
3 columns
The parameter is used to specify whether the control element occupies two columns (two
buttons or control frames) or three columns (three buttons or control frames).
2.4.4 Icon type
Options: Standard
User-defined
The parameter is used to set whether a standard icon or a self-selected icon is displayed.
