ABB IP Touch 7 - Installation Sequence; Integrating the IP Touch into the ETS

Commissioning of the KNX Function via DCA (from ETS5)
Product manual 2CKA001473B5023
│
15
1.1.6 Installation sequence
The ETS5 app (etsapp file, ABB Touch DCA) for the IP touch is installed via the ETS.
The app can be downloaded either via www.BUSCH-JAEGER.com or via the My KNX access.
Fig. 1: App installation
1. Open the ETS5.
2. Click the green plus sign.
3. Select the etsapp file.
– The app is added to the ETS.
Notice
The displayed apps, the designation and the versions are only exemplary and
serve only for illustration.
1.1.7 Integrating the IP touch into the ETS
1. Start the ETS.
2. Import the product data of the IP touch into the project database via the import function of
the ETS (File type: *.knxprod).
