ABB IP Touch 7 - Icon Type

Control elements and application parameter
"Blind" control element
Product manual 2CKA001473B5023
│
78
2.7.5 Icon type
Options: Blind animation
Shutter animation
Marquee animation
Hang animation
User-defined
The parameter is used to set whether a standard icon or a self-selected icon ("user-defined") is
displayed.
The following supplementary parameters are available for all options:
Position for up/open icon:
Options: Left
Right
The parameter is used to specify whether the icon for "Up/Open" is positioned on the right or left
side of the control element.
Icon for up/open:
Options: <Selection of an icon from the list>
The parameter is used to select the icon that is to be displayed in the control element for
"Up/Open".
Icon for Down/Close:
Options: <Selection of an icon from the list>
The parameter is used to select the icon that is to be displayed in the control element for
"Down/Close".
The following parameters can only be set when parameter "Icon type" is set on "User-defined".
Icon for opened:
Options: <Selection of an icon from the list>
The parameter is used to select the icon that is to be displayed when the blind is open.
Icon for closed:
Options: <Selection of an icon from the list>
The parameter is used to select the icon that is to be displayed when the blind is closed.
Icon for intermediate position:
Options: <Selection of an icon from the list>
The parameter is used to select the icon that is to be displayed when the blind is in an
intermediate position.
