Case studies
Product manual 2CKA001473B5023
225
Pos. Description
1
Door communication and KNX within the flat.
Direct connection between IP touch and KNX IP interface.
Static IP address assignment for KNX IP interface via ETS. Static IP address assignment for
LAN interface.
An Internet connection is required for the use of ABB-Welcome
®
App.
2
Door communication and KNX in the flat
Use of a common PoE switch
Static IP address assignment for KNX IP interface via ETS.
Static IP address assignment for the interface LAN.
An Internet connection is required for the use of ABB-Welcome
®
App.
3
Door communication and KNX in the flat
Use of a router (the IP addresses are assigned by the router)
The assignment of fixed DHCP addresses is recommended.
[A] Welcome IP door communication
[B] Private area
For further information on IP address assignment, see see chapter 6.2 “Basic information“ on
page 223.
To Next Page
Loading...
